Digital Equipment DECstation 5000/100 Series, Руководство по обслуживанию

Страница: 279 / 392

2D graphics accelerator module configuration displays
To obtain a 2D graphics accelerator module configuration
display, type cnfg slot_number , where you replace slot_number
with the slot number for the 2D graphics accelerator module for
which you want a configuration display, and press Return.
The following is a sample configuration display for a 2D
graphics accelerator module in option slot 1:
1: PMAG-AA DEC V5.2a TCF0 (PX -- D=8)
The 2D graphics accelerator module display has the same
meaning as the 2D graphics accelerator module description in
the general configuration display. For an explanation of the
2D graphics accelerator module configuration display, refer to
‘‘General system configuration displays’’ on page C-10.
3D graphics module configuration displays
To obtain a 3D graphics module configuration display, type
cnfg 1 , where 1 is the slot number for the 3D graphics module
Then press Return.
The following is a sample configuration display for a low 3D
graphics module:
1: PMAG-DA DEC V5.2a TCF0 (DA: PXG -- D=8, z=24)
In this display,
The leftmost column lists the low 3D graphics module slot
number.
PMAG-DA is the part identifier for low and mid 3D
graphics modules. High 3D graphics module displays
list PMAG-FA as the part identifier.
Digital is the module manufacturer.
The fourth column from the left lists the firmware version
that each module contains.
The fifth column from the left lists the firmware type in
each module.
Console Commands C–17