Digital Equipment DECstation 5000/100 Series, Руководство по обслуживанию

Страница: 282 / 392

Specify -u to display the contents in unsigned decimal
format.
Specify -d to display the data in decimal format.
Specify -c to display the data as ASCII characters.
Include the optional -S
count
parameter to have the
command repeatedly fetch the value, but display the value
only once. When you type this parameter, replace
count
with the number of times that you want to fetch the value.
Use the
rng parameter to specify the range of addresses
you want to examine.
To examine values at a single address, replace rng with
that address.
To examine values at a range of addresses, replace
rng with the address range. Use the form address_
low : address_high to define the range.
When you enter the address range, replace address_low
with the starting address for storing values and replace
address_high
with the ending address for storing
values.
To examine values at a series of addresses, replace
rng
with the starting address and the number of successive
addresses you want to examine.
Use the form
address_low # count to specify the
addresses where you store values. When you type
this address range format, replace address_low with
the starting address for storing values. Replace
count
with the number of addresses at which you want to
store values.
To specify more than one address range, separate each
range specification with commas. Leave no spaces
between the ranges.
C–20 Console Commands