DigiDesign D-Show Profile, Руководство пользователя

Страница: 78 / 270

D-Show Profile Guide 68
Digital Input Sources
On systems that include a DSI (Digital Stage Input) card, the
following additional settings and displays are provided.
Lock LED
Indicates lock status for the channel, and mirrors
the same LED on the DSI card.
SRC Off
Toggles Sample Rate Conversion on or off for that
channel, and mirrors the same LED on the DSI card. A lit SRC
Off switch indicates that SRC is disabled.
ADAT (Source)
Enables the ADAT Optical port as the active in-
put source on the DSI card. When lit, the DSI card is clocking
and listening to corresponding ADAT input; when dark, the
channel is receiving input from the corresponding AES input.
Direct Outs are also available on DSI-fed channels, and their
pickoff point can be specified in the patchbay.
Channel Solo
Three Solo modes are available: Solo In Place (SIP), Pre-Fader
Listen (PFL), and After-Fader Listen (AFL), and several options
are available for configuring Solo bus operation. Channels can
also be implicitly soloed as part of a VCA.
To solo a channel:
■
Press the channel’s Solo switch so that the Solo switch is lit.
Channel Mute
Channels can be muted in three ways: explicitly with the
channel mute switch; implicitly as a result of another channel
being soloed, and as a member of a Mute Group or VCA.
To explicitly mute a channel:
■
Press the Mute switch on the channel. The mute switch
lights solid to indicate the channel is explicitly muted.
Channel Faders
Channel Faders provide channel level control from –
∞
(–INF)
to +12 dB.
Fader Banking Controls
Input Channels are displayed in banks on the control surface
channel strips.
Input controls for a DSI channel
See Chapter 14, “Solo and Monitor Busses.”
Lock LED
SRC Off
Source
See Chapter 15, “Muting and Mute Groups.”
For more information on input and output fader banking,
see Chapter 5, “Navigating and Selecting Channels.”