manualshive.com logo in svg

DigiDesign D-Show Profile, Руководство пользователя

Поделиться
Скачать
DigiDesign D-Show Profile Скачать руководство пользователя страница 156

D-Show Profile Guide

146

4  

Click the Device Selector pop-up menu and do one of the 

following:

• Choose Previous Installs to access any plug-in installers 

after a system update. 

• Choose Console to access all factory-installed plug-in in-

stallers. after a system update or a full system restore. 

• Choose an external storage device, as available, to access 

plug-in installers loaded in the FOH Rack CD-ROM drive. 

5  

Select a plug-in from the Plug-Ins to Install list on the left by 

doing any of the following:

• Click to select a single installer.

• Shift-click to select multiple contiguous installers. 

• Control-click to select or deselect installers one at a time.

6  

Click Install to install the selected plug-ins. Once installed, 

the plug-in appears in the Installed Plug-Ins list on the right.

7  

Repeat as necessary to re-install all plug-ins needed on the 

system. 

Removing Plug-Ins

Uninstalling a plug-in removes the plug-in from the racks but 
the installer remains in the Previous Installs cache, making it 
easier to reinstall the plug-in at a later time without requiring 
the installer CD or other media. In order to completely re-
move and delete a plug-in and its installer, you must explicitly 
Delete the plug-in, as described in the following sections. 

To uninstall a plug-in from the system but leave its installer 
available:

1  

Put D-Show in Config mode. 

2  

Go to the Options page and click the Plug-Ins tab. 

3  

Right-click the specific plug-in name from the right-hand 

list and choose the Uninstall option for the selected plug-in.

Figure 11.  Options > Plug-Ins screen

Device selector

Available plug-ins

Installed plug-ins

Install

Choosing a Device

Device 
selector

Installing, uninstalling, and deleting plug-ins are not sup-
ported using the Standalone software. 

Uninstalling a plug-in

Right-click 

Содержание D-Show Profile















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды