manualshive.com logo in svg

DigiDesign D-Show Profile, Руководство пользователя

Поделиться
Скачать
DigiDesign D-Show Profile Скачать руководство пользователя страница 167

Chapter 19:  Plug-Ins

157

Software Screen 

The software screen can also be used to patch, route, or 
re-route plug-ins during a performance, even while in Show 
mode. 

“Jump To” Plug-Ins 

The Input and Output screens let you “jump to” a specific 
plug-in insert to adjust it on-screen. 

To jump to a plug-in insert from the Inputs or Outputs screen:

1  

Select a channel to display it in the Inputs or Outputs 

screen. 

2  

Click the plug-in name shown in the channel Insert section.

To jump to a plug-in on a bus:

1  

Bank to the FX Return or other channel type assigned as the 

plug-in output, or bank to the output feeding the plug-in. 

2  

Select the channel to display it in the Inputs or Outputs 

screen. 

3  

Click the routing displayed beneath the Channel Name. 

Plug-Ins Screens and Channel Selection

When jumping to a plug-in, display depends on the type of 
plug-in routing, as follows:

Channel Inserts 

If the Plug-Ins screen is in Zoom view while 

you select a channel, the last selected plug-in for that channel 
is automatically selected and displayed in the Plug-Ins screen. 

Bus-Fed Plug-Ins 

If no plug-ins are inserted on a channel (such 

as when returning a bus-fed plug-in to an FX Return) the 
plug-in feeding that FX Return is displayed. 

Pinning a Plug-In View 

It is possible to decouple the plug-in view from the console for 
consistent and constant access to a single plug-in on-screen, 
while still being able to select and adjust other plug-ins from 
the console. This capability is useful any time you want to al-
ways display an important plug-in (such as an analysis plug-in 
or primary EQ).

To pin a plug-in view:

1  

Bring the desired plug-in into the main plug-in view (use 

the channel Select and Insert Mode switches, or double-click 
the desired plug-in in the rack). 

2  

Click the Push-Pin icon in the upper-right of the screen (the 

icon is located just to the left of the Presets and View Toggle 
icons. 

• When enabled, the Push-Pin icon appears lit. This indi-

cates that the current plug-in will remain on-screen and 
will not lose focus, even if another channel is targeted. 

• When not enabled, the Push-Pin icon appears unlit. 

Plug-in view follows control surface selections. 

Adjusting EQ and Dynamics Plug-Ins 
from the ACS

Many D-Show compatible EQ and Dynamics plug-ins map to 
the dedicated EQ and Dynamics controls in the ACS. Parame-
ters map identically to those for the built-in EQ and dynamics, 
providing consistent location and control of these critical ef-
fects. 

Plug-Ins that do not map to the ACS can be adjusted using the 
Assignable Output Encoders, as explained in “Adjusting 
Plug-Ins” on page 155. 

Adjusting EQ Plug-Ins

To adjust an EQ plug-in using the ACS EQ section:

1  

Target the channel with the plug-in by pressing the channel 

Select switch.

2  

Press the plug-in Select switch (located at the top of the ACS 

EQ section).

3  

Adjust plug-in parameters by pressing or turning the corre-

sponding ACS EQ encoders.

4  

Toggle the plug-in in and out using by pressing the EQ In 

switch.

Plug-Ins must already be installed on the D-Show system, 
and assigned to a rack slot, to be available while mixing. 
See “Assigning Plug-Ins to Rack Slots” on page 152.

Jumping to a plug-in on a channel insert

Jumping to a plug-in on an FX Return

Click 

Push-Pin plug-in view icon

Содержание D-Show Profile















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды