DigiDesign D-Show Profile, Руководство пользователя

Страница: 124 / 270

D-Show Profile Guide 114
Clearing Solos
If any channel is soloed on the console, the Solo Clear switch
in the Solo/PFL section flashes.
To clear all solos on the console:
■
Press the flashing Solo Clear switch.
Solo Bus Metering
When a channel or dynamics key input is sent to the Solo bus,
its signal is metered on the Selected Channel meters on the
meter bridge, temporarily replacing the metering for any cur-
rently targeted channel.
For more information, see “Metering on the Solo Bus” on
page 109.
Solo Safing Channels
Only Input Channels and FX Returns can be made solo safe.
Solo safed channels are automatically added to any explicitly
soloed channels.
Solo Safe only applies to SIP and AFL mode. Solo safe status is
ignored in PFL mode.
To toggle the solo safe status of Input Channels and FX Re-
turns, the Safe switches must be set to control the Solo Safe
function.
To set Safe switches to control the Solo Safe function:
1
Go to the Options page and click the Interaction tab.
2
Under Input Safe Switches, select “Act as Solo Safes.”
To toggle the solo safe status of a channel, do one of the
following:
■
Select one or more channels, then press the Safe switch in
the Selected Channel Input section.
– or –
■
Click the on-screen Solo Safe button for the channel.
The Safe switch and button flash to indicate the channel is
solo safe. When a channel is soloed because of its Solo Safe sta-
tus, its Solo switch flashes.
Monitor Bus Operation
The Monitor bus outputs signal to both the near-field monitor
output (on the FOH Rack) and headphone output (on the
front of the D-Show console). The Monitor bus outputs can
also be routed to D-Show hardware outputs and to bus-fed
plug-ins.
Monitor Bus Switching
The following signals can feed the Monitor bus, listed below
in order of priority: Key Listen, Solo bus, 2-Track return, COM
input, and the Main mix.
Dynamics Key Listen
Pressing the Key Listen switch in the ACS section sends the
key signal from the targeted channel’s built-in dynamics pro-
cessor to the Monitor bus.
Key Listen temporarily overrides the currently enabled Solo
bus operation (PFL or AFL), and replaces any other signal on
the Monitor bus with the mono key signal.
AFL/PFL Solo Bus
In AFL or PFL mode, signal from any soloed channels is sent to
the Monitor bus. When any channel is soloed, the Solo bus
overrides the 2-Track return if it is enabled, or the Main mix if
it is currently being sent to the monitors.
Solo Clear
Solo Clear
On-screen Solo Safe button