manualshive.com logo in svg

Destiny Networks Domain 3000, Начало работы

Поделиться
Скачать
Destiny Networks Domain 3000 Скачать руководство пользователя страница 84

The Info Menu 

After clicking on the name of the 
AV component in the schematic 
menu, you should get a menu like 
the one at the right. 

Name and Display Name 

Here you see the name and 
display name of the device. You 
can change them, if you want. 

Mfg, Model, Device Description 
File (DDF) 

This tells you the name of the 
manufacturer and model of this 
AV component. It also tells you 
the Device Description file that is 
being used. This file could have 
come from the Destiny Library or 
the User Library. However, at 
present, 

it is part of this project 

and may be different than the 
ones you have in your library

 if 

your library was changed after 
adding this description file to this 
project. 

  

 

Edit this Device Description File 

You can Edit the Device Description File - to add to or change the IR or serial commands or to change the functionality of the buttons of 
the remote control (as we will see shortly). When you click this button, the Device Description Wizard will open to this AV component 
inside your project. When you finished with the Device Description Wizard, it will change the device description of the AV component in 
this project and offer to save the changes to your User Library, as well. 

Содержание Domain 3000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды