Destiny Networks Domain 3000, Начало работы

Страница: 61 / 111

After clicking on the port, you will
get the pop up menu at the right.
Basically, it is saying that the
Coax 1 port has not been
assigned yes, and is asking you
to use the dropdown menu to
assign it to an input connector
group.
Use the dropdown menu to select
the DVD input connector group
as shown at the right.
Click "Assign".
After clicking "Assign" the "Coax 1: Coax Digital" port will join the DVD input connector group and a wire will connect the coax output of
the DVD player to the coax input of the AV surround receiver. Note that
the Domain controller will not program the Denon AVR-3805 to
assign the Coax Digital input to the DVD input connector group. Rather, you are just telling the Domain Controller how the wires are
physically wired and how you have programmed the Denon to treat the assignable port.
Note that the audio signal became a green wire, where as, the video wire that was added earlier showed up as a blue wire.
Now the Ubiquity software knows of a path from the DVD player through the Denon to the Living room speakers. However, it cannot
control either the DVD player nor the AV receiver, so it is too early to try things out.