Destiny Networks Domain 3000, Начало работы

Страница: 20 / 111

into a digital input on the back of a Domain Controller.
Draw a block diagram of the AV equipment
Before beginning, you may want to jot down a detailed schematic of the entertainment equipment and all of the interconnections.
Make sure that you know the room in which each component belongs and the type of interconnections (e.g., Component, S-Video,
Composite, etc) that will be used to wire it to the other components as shown below.
Add the IR and serial control cables to your block diagram and indicate what port on the Domain controller they will use.
If you know that some of the AV components do not have discrete power on/off command, you can add connections for getting the
Power Status of those components to your block diagram, also.
Schematic of the AV equipment
However, you do not have to create a block diagram on a computer (like the one above) - a pencil drawing is fine as Ubiquity will
auto generate a schematic for you with all of the wires for audio, video, and control (as shown below).