manualshive.com logo in svg

Destiny Networks Domain 3000, Начало работы

Поделиться
Скачать
Destiny Networks Domain 3000 Скачать руководство пользователя страница 27

Add the Samsung DVD-HD941 
DVD player 

Select the "Destiny Library" 

Press the "Tab" key twice to get 
to the"Type" field and use the 
dropdown menu to select "DVD" 
(or press the "D" key with this 
field highlighted). 

For "Manufacturer" select 
"Samsung" or substitute the 
manufacturer's name of the DVD 
player you actually intend to use. 

For "Model" select "DVD-HD941". 

You can use the defaults for the 
rest. 

Note that this device uses the 
play command to create a 
discrete "Power On" command, 
but it does not have a discrete 
"Power Off" command. 

Click "Add & Continue" 

  

 

If your AV component does not exist in the library, please check the AV components on our web 
site to see if the component has been added more recently than those shipped with this software 
release. If not, please proceed to the Device Description Wizard (DDW) to create the Device 
Description File for a new component. 

A new component will appear on the schematic and the "Add Component in Theater" menu will still be available for adding additional 
components. 

The DVD player will have a red top banner - indicating that it has one or more errors associated with it. This error reporting capability is 
called AV AWARE (Audio/Video Always Watching And Reporting Errors). 

Click on the "err" (on the right) to see the errors. At this point, the pop up error menu would report the following. 

 

Содержание Domain 3000
















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды