Denon DCM280 - CD Changer Player, Руководство по эксплуатации

Страница: 9 / 82

ENGLISH
9
7
CONNECTIONS
(1) Connecting the Output Terminal
• Connect one end of the connection cord supplied
with the CD Player to the output terminals, left (L)
and right (R) of the CD Player, and the other end
to the CD, AUX or TAPE PLAY input terminals,
left (L) and right (R), of the amplifier.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
SYNCHRO
AC OUTLET
PHONO CD TUNER AUX TAPE-1
/DAT
TAPE-2
/MD
TAPE-1
/DAT
TAPE-2
/MD
L
R
PB REC
SIGNAL
GND
INPUTS
L
R
R L
SPEAKER SYSTEMS
A
B
DCM-280
Power supply outlet (Amplifier)
(2) Connecting the Digital Output Jack (COAXIAL)
• Use a 75
Ω
/ohm pin cord to connect the digital
output jack (COAXIAL) of the CD Player to the
digital input jack (COAXIAL) on a digital processor
or MD recorder, available in stores.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
SYNCHRO
DIGITAL INPUT
COAXIAL
OPTICAL
DCM-280
Power supply outlet
(Digital processor or MD recorder)
(3) SYNCHRO Jack Connections
• Connect the SYNCHRO jack with a DENON
cassette deck which is equipped with a
SYNCHRO jack, then make a synchronized
recording. Use the connection cord supplied with
the cassette deck.
• To make use of this function, also connect the
output jacks and make the settings so that a
recording can be made from the CD player to the
cassette deck.
COAXIAL
DIGITAL OUT
LINE OUT
VARIABLE
SYNCHRO
DCM-280
Power supply outlet (Cassette Deck)
8
NORMAL PLAY
Follow the steps below to get an understanding of the disc play procedure.
(1) Starting Playback
(
1
PLAY )
1. Turn the POWER switch on and press the 5
OPEN/CLOSE button to open the drawer.
2. Set the disc to be played in the front side tray.
3. Press the
1
PLAY button.
4. The drawer closes and the disc just loaded is
played.
5. The disc number, track number and elapsed time,
etc., for the disc currently playing appear on the
display window.
6. If the
5
OPEN/CLOSE button is pressed while a
disc is playing, playback continues, but the drawer
opens and four discs can be replaced. The disc
that can be replaced switches when the DISC
SKIP button is pressed.
Press the
5 OPEN/CLOSE button again to close
the drawer.
(2) Stopping Playback
( 2 STOP )
1. Press the 2 STOP button to stop playback.
2. To replace discs, press the
5
OPEN/CLOSE
button.
The disc which was playing switches over to the
front side and the drawer opens.
• Set the disc you want to played in the front side.