Denon DCM280 - CD Changer Player, Руководство по эксплуатации

Страница: 11 / 82

11
ENGLISH
y
To Repeat Play of All Tracks ……………………
• Press the REPEAT button. The “REPEAT” indicator
will light up.
✽
Steps
q
and
w
can be done in any order, with the
same results.
Repeat Play
1
2
(
1
PLAY )
( REPEAT )
• When the REPEAT button is pressed once, the
“REPEAT” and “1” indicators light. In this mode,
the track currently playing is repeated.
Track Track Track
REPEAT 1
REPEAT
• If the REPEAT button is pressed again, the
“REPEAT” and “1 DISC” indicators light, and the
disc currently playing is repeated.
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
REPEAT
REPEAT
1 DISC
• If the REPEAT button is pressed again, the
“REPEAT” and “DISC” indicators light, and all the
discs currently loaded are repeated.
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
REPEAT
REPEAT
DISC
• Pressing the REPEAT button during play will also
cause the player to repeat play (of all tracks).
• To cancel repeat play, press the REPEAT button
once more.
• Pressing the REPEAT button while a program is
being played will cause the tracks in the program to
be played again in order.
• Pressing the REPEAT button during Random play
will cause the tracks to be played again at random.
u
Letting the Player Select the
Order of Play ………………………………………
1
2
( RANDOM )
Random Play
(When using the remote control unit)
(1) Full Random Play
( 1 PLAY )
• Press the RANDOM button, then press the 1
PLAY button. The microcomputer will then start
play of the tracks on the 5 discs at random.
1
2
5
3
4
6
( RANDOM )
(2) Program Random Play (Remote control only)
( 1 PLAY )
• After pressing the PROG/DIRECT button and
inputting a program (See item
t
on page 10, 11),
press the RANDOM button, then the
1
PLAY
button. The microcomputer will then select tracks
from the program at random and play them.
( PROG /
( DIRECT )
( DISC
( SELECT )
( 1 ~ 10 )
( 1 ~ 5 )
1
2
3
4
( RANDOM )
(3) Disc Sequential Random Play
( 1 PLAY )
• Press the RANDOM button and specify the disc
numbers (1 to 5) with the DISC SELECT button and
the number buttons. A press of the
1
PLAY button
will result in the player randomly selecting and
playing tracks on the disc in the order of specified
discs.
Up to 5 discs can be selected, and the same disc
can be selected, two or more times. Disc
sequential random play is cancelled when play
ends.
( DISC
( SELECT )
( 1 ~ 5 )
(4) To Cancel Random Play
• Pressing the RANDOM button once more cancels
the Random function. Play will then proceed from
the track currently being played to the end of the
last track on the disc, then stop.
Pressing the
5 OPEN/CLOSE button also cancels
the Random function.
Cautions:
• Pressing the RANDOM button during normal play
starts full random play.
• Pressing the RANDOM button during Program play
starts random play of the tracks in the program,
including the tracks which have already been
played.
• During random play, the player may display the
number of disc which is not loaded in the tray. In
such a case, the player will read the disc
information, then reset automatically to correct.
This is not a malfunction.
• MP3 discs are ignored during program random play.
(3) To Play a Program
(
1
PLAY )
( 1 PLAY )
• Press the 1 PLAY button to play the programmed
selections in the order in which they were
programmed.
(4) To clear the entire program
• Pressing the PROG/DIRECT button once more
erases the entire program. Pressing the
5
OPEN/CLOSE button also erases the contents of a
program.
• Pressing the PROG/DIRECT button while a program
is being played cancels the program. Play will then
be continuous to the end of the disc currently being
played, after which the player will stop
automatically.
Cautions:
• Programmed playback is not possible with MP3
discs.
If an MP3 disc is specified, that step in the program
is ignored.
• If a program is run during playing of a track or from
the Pause state, the track which is currently being
played becomes the 1st track in the program.
• Direct selection cannot be done while a program is
being played. Inputting the track number of a
desired track with the Track Number buttons adds
the input track to the end of the program.
• When programming, do not program a track
number which is not recorded on the disc. If such a
number is programmed by mistake, the player
ignore the program.