Denon DCM280 - CD Changer Player, Руководство по эксплуатации

Страница: 8 / 82

ENGLISH
8
(2) Rear Panel
!6
Output Terminal (LINE OUT)
• Connect the connection cords from these
terminals to the amplifier’s input terminals.
(Refer to page 9 for connections.)
!7
SYNCHRO Jack (SYNCHRO)
• To make a synchronized recording, this jack
must be connected to the SYNCHRO jack of
the deck with a connection cord. (Refer to
page 9 for connections.)
!8
Digital Audio Output Connector
(COAXIAL)
• Connect a commercially available 75
Ω
/ohms
pin-plug cord.
• Digital data is output from this connector.
(3) Display
1
2
3
4
5
TRACK
DISC
° ° °
° °° °°
MIN SEC
PROGRAM RANDOM REPEAT
REMAIN
EACH
TOTAL
R
MP3 CD
1 DISC
16 17 19 18 20
11 12 14 13 15
6 7 9 8 10
1 2 4 3 5
Play Indicator
Disc Indicator
Disc Number
CD Indicator
MP3 Indicator
Pause Indicator
Random
Indicator Repeat
Indicator Program
Indicator
Disc
Remaining
time Indicator
Remote control signal
Receive Indicator Track
Number
minute second
Time
20-track
music calendar
Continuous Button Operation
If the Automatic/Manual Search Reverse button
y
or the Automatic/Manual Search Forward button
u
are held in, the function of that button will be
repeated.
6
OPENING AND CLOSING THE DRAWER AND LOADING A DISC
Opening and closing the drawer (This operation
only works while the power is on.)
1. Press the POWER switch to turn on the power.
2. Press the
5
OPEN/CLOSE button.
How to load a disc
• Make sure the drawer is completely open.
• Hold the disc by the edges and place it on the disc
tray. (Do not touch the signal surface, i.e., the
glossy side.)
• Set the disc properly in the tray according to its
size.
Set 8 cm discs in the center hole.
Set 12 cm discs in the outer hole.
• When the drawer is opened during the stop mode,
discs can be loaded in the 3 disc trays. If the DISC
SKIP button is pressed, the carousel turns and a
disc can be loaded in the another disc tray.
When the drawer is opened during the play mode,
it is possible to load and unload discs in all of the
disc trays other than the one whose disc is
currently playing. 3 discs can be replaced and press
the DISC SKIP button to switch the other disc tray
that can be replaced.
• Press the 5 OPEN/CLOSE button to close the
drawer.
Caution:
• The player will not operate properly and the disc
may even be damaged if it is not set correctly.
• If your finger should get caught in the drawer when
it closes, press the
5
OPEN/CLOSE button.
• Do not place any foreign objects on the disc tray,
and do not place more than one disc on the tray at
a time. Otherwise malfunction may occur.
• Do not push in the disc tray manually when the
power is off as this may cause malfunction and
damage the CD player.
• Do not touch the carousel while it is turning. Also,
do not turn the carousel by hand when it is
stopped. Doing so could damage it.
• Do not insert disc where indicated by arrow.
This could damage the internal mechanism in the
unit.
LABEL SIDE
UP WARD
!0
Play Button ( 1 PLAY)
• Press this button to play a disc.
The “ 1 ” indicator lights up when the button is
pressed, the number of the disc and the track
being played is displayed by the Disc Number
and Track No. indicator, and the amount of
elapsed time for the current track is displayed
by the Time indicator.
• The “ 1 ” indicator goes off after playing of the
final track of the final disc is finished and the
player stops.
!1
Disc Skip Button (DISC SKIP)
• Each time this button is pressed, the carousel
will rotate in a clockwise direction to the next
tray position. This allows for loading or
unloading of discs.
This button is also used to select the next disc,
in the normal play continuously.
!2
Open/Close Button (
5
OPEN/CLOSE)
• Press this button when opening.
• The drawer is opened toward the front.
• Press the button again to close the drawer.
!3
Loading Drawer
• Discs can be loaded and unloaded when this
drawer is open. Do not force the drawer closed
by hand.
!4
Headphone Jack (PHONES)
• Insert the jack of the headphones when
desiring to listen to a disc privately.
(Headphones are sold separately.)
!5
Disc Trays (1 ~ 5)
• One disc per tray can be loaded.