Denon DCM280 - CD Changer Player, Руководство по эксплуатации

Страница: 14 / 82

14
ENGLISH
11
PLAY USING THE REMOTE CONTROL UNIT
The DCM-280 CD Player can be controlled from across the room using the accessory Remote Control Unit.
(1) Inserting the Dry Battery
1. Remove the cover on the back of the remote
control unit.
RC-258
2. Insert two R6P (AA size) batteries in the RC-258,
following the indications on the battery
compartment.
3. Replace the cover on the back of the remote
control unit.
Cautions Concerning Dry Batteries
• Use R6P batteries in the RC-258 remote control
unit.
• Depending on the frequency of use, the dry
batteries should be replaced approximately once
per year.
• If the remote control unit fails to control the CD
Player, even before a year has passed, replace the
dry batteries with new ones.
• Be sure to follow polarity indications inside the case
of the remote control unit, inserting the + end and –
end of each battery in the directions indicated.
• Batteries may become damaged or leak under the
following conditions.
✽
Using new batteries together with old ones.
✽
Using different types of batteries together.
✽
Do not short batteries, take them apart, subject
them to heat or throw them into a fire.
• When the remote control unit is not used for a long
period of time, remove the dry batteries.
• If fluid leaks from the batteries, be sure to wipe up
all battery fluid inside the battery case and replace
the batteries with new ones.
(2) Using the Remote Control Unit
• Aim the remote control unit toward the light
receptor in the front of the CD Player, as shown in
the drawing below.
• The remote control unit can be used up to a
distance of 8 meters in a straight line from the CD
Player. However, this distance will be shortened if
there is some obstruction between the remote
control unit and the light receptor, or if the beam of
light is slanted.
REMOTE SENSOR
Left 30°
Right 30°
• The remote control unit has the same functions as
the main unit, but the following operations cannot
be done.
✽
Switching the power on and off.
Cautions During Use
• Do not press the operating buttons on the main unit
and the remote control unit at the same time. This
could cause a malfunction.
• Operation of the remote control unit will be
hindered if a strong light from the sun or a light
fixture is shining on the REMOTE SENSOR, or if
there is an obstruction between the remote control
unit and the CD player unit.
• Press the REPEAT button. The “REPEAT 1”
indicator will light up.
✽
Steps
q
and
w
can be done in any order, with the
same results.
1
2
(
1
PLAY )
( REPEAT )
• When the REPEAT button is pressed once, the
“REPEAT” and “1” indicators light. In this mode,
the track currently playing is repeated.
Track Track Track
REPEAT 1
REPEAT
• If the REPEAT button is pressed again, the
“REPEAT” and “1 DISC” indicators light, and the
disc currently playing is repeated.
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
REPEAT
REPEAT
1 DISC
• If the REPEAT button is pressed again, the
“REPEAT” and “DISC” indicators light, and all the
discs currently loaded are repeated.
1st disc
(ALL TRACKS)
2nd disc
(ALL TRACKS)
5th disc
(ALL TRACKS)
REPEAT
REPEAT
DISC
• Pressing the REPEAT button during play will also
cause the player to repeat play (of all tracks).
• To cancel repeat play, press the REPEAT button
once more.
(4) To Repeat Play of All Tracks
NOTE:
• The single track and 1 disc repeat mode cannot be
set during disc sequential random play.