Dell S4048T, Руководство по настройке

Страница: 939 / 1277

myrole secadmin Exec Config Line
Modifying Command Permissions for Roles
You can modify (add or delete) command permissions for newly created user roles and system defined roles
using the
role mode { { { addrole | deleterole } role-name } | reset } command
command in Configuration mode.
NOTE: You cannot modify system administrator command permissions.
If you add or delete command permissions using the
role
command, those changes only apply to the
specific user role. They do not apply to other roles that have inheritance from that role. Authorization and
accounting only apply to the roles specified in that configuration.
When you modify a command for a role, you specify the role, the mode, and whether you want to restrict
access using the
deleterole
keyword or grant access using the
addrole
keyword followed by the
command you are controlling access. For information about how to create new roles, see also
Creating a New User Role.
The following output displays the modes available for the
role
command.
Dell (conf)#role ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Examples: Deny Network Administrator from Using the show users Command.
The following example denies the
netadmin
role from using the
show users
command and then verifies
that
netadmin
cannot access the
show users
command in exec mode. Note that the
netadmin
role is not
listed in the
Role access: secadmin,sysadmin
, which means the
netadmin
cannot access the
show
users
command.
Dell(conf)#role exec deleterole netadmin show users
Dell#show role mode exec show users
Role access: secadmin,sysadmin
Example: Allow Security Administrator to Configure Spanning Tree
The following example allows the security administrator (secadmin) to configure the spanning tree protocol.
Note
command is protocol spanning-tree.
Dell(conf)#role configure addrole secadmin protocol spanning-tree
Example: Allow Security Administrator to Access Interface Mode
The following example allows the security administrator (
secadmin
) to access Interface mode.
Dell(conf)#role configure addrole secadmin ?
LINE Initial keywords of the command to modify
Dell(conf)#role configure addrole secadmin interface
Security 939