Dell(conf)#
1
Select a cam-acl action.
CONFIGURATION mode
cam-acl [default | l2acl]
NOTE:
Selecting
default
resets the CAM entries to the default settings. Select
l2acl
to allocate
the desired space for all other regions.
2 Enter the number of FP blocks for each region.
EXEC Privilege mode
cam-acl {default | l2acl
number
ipv4acl
number
ipv6acl
number
ipv4qos
number
l2qos
number
l2pt
number
ipmacacl
number
vman-qos | vman-dual-qos number
ecfmacl
number
nlbcluster
number
ipv4pbr
number
openflow
number
| fcoe
number
iscsioptacl number [vrfv4acl number]
NOTE:
If you do not enter the allocation values for the CAM regions, the value is 0.
3 Execute write memory and verify that the new settings are written to the CAM on the next boot.
EXEC Privilege mode
show cam-acl
4 Reload the system.
EXEC Privilege mode
reload
Test CAM Usage
To determine whether sufficient CAM space is available to enable a service-policy, use the
test-cam-usage
command. To verify the actual CAM space required, create a Class Map with all required ACL rules, then
execute the
test cam-usage
command in Privilege mode. The Status column in the command output
indicates whether or not you can enable the policy.
Example of the
test cam-usage
Command
Dell#test cam-usage service-policy input test-cam-usage stack-unit 2 po 0
Stack-Unit| Portpipe|CAM Partition|Available CAM|Estimated CAM per Port|Status
-----------------------------------------------------------------------------------
-
2 | 0 |IPv4Flow |192 |3 |Allowed
(64)
Dell#
Content Addressable Memory (CAM)
276
Содержание S4048T
