Dell S4048T, Руководство по настройке

Страница: 747 / 1277

•
authentication-algorithm
: specifies the authentication algorithm to use for encryption. The
valid values are
MD5
or
SHA1
.
•
key
: specifies the text string used in authentication. All neighboring OSPFv3 routers must share key
to exchange information. For
MD5
authentication, the key must be 32 hex digits (non-encrypted) or
64 hex digits (encrypted). For
SHA-1
authentication, the key must be 40 hex digits (non-encrypted)
or 80 hex digits (encrypted).
•
key-authentication-type
: (optional) specifies if the authentication key is encrypted. The valid
values are
0
or
7
.
• Remove an IPsec encryption policy from an OSPFv3 area.
no area area-id encryption ipsec spi number
• Display the configuration of IPsec encryption policies on the router.
show crypto ipsec policy
Displaying OSPFv3 IPsec Security Policies
To display the configuration of IPsec authentication and encryption policies, use the following commands.
• Display the AH and ESP parameters configured in IPsec security policies, including the SPI number, key,
and algorithms used.
EXEC Privilege mode
show crypto ipsec policy [name name ]
•
name
: displays configuration details about a specified policy.
• Display security associations set up for OSPFv3 links in IPsec authentication and encryption policies on the
router.
EXEC Privilege
show crypto ipsec sa ipv6 [interface interface ]
To display information on the SAs used on a specific interface, enter
interface interface
, where
interface is one of the following values:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port[/
subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a port channel interface, enter the keywords
port-channel
then a number.
• For a VLAN interface, enter the keyword
vlan
then a number from 1 to 4094.
Examples of the
show crypto ipsec
Commands
In the first example, the keys are not encrypted (shown in bold). In the second and third examples, the keys
are encrypted (shown in bold).
The following example shows the
show crypto ipsec policy
command.
Dell#show crypto ipsec policy
Crypto IPSec client security policy data
Policy name : OSPFv3-1-502
Policy refcount : 1
Inbound ESP SPI : 502 (0x1F6)
Outbound ESP SPI : 502 (0x1F6)
Inbound ESP Auth Key : 123456789a123456789b123456789c12
Outbound ESP Auth Key : 123456789a123456789b123456789c12
Open Shortest Path First (OSPFv2 and OSPFv3) 747