Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 88 / 158

NOTE: Information sent in cleartext is not encrypted and therefore can be
intercepted.
If the device is operating in a Common Criteria environment, see the Secure Configuration
Guide for Common Criteria and JUNOS-FIPS .
Related
Documentation
Connecting a J-SRX100 Services Gateway to the J-Web Interface on page 63
•
•
Connecting the J-SRX100 Services Gateway to the CLI on page 65
•
Performing Initial Software Configuration on the J-SRX100 Services Gateway Using
the CLI on page 74
•
Performing Initial Software Configuration on the J-SRX100 Services Gateway Using
the J-Web Interface on page 77
•
J-SRX100 Services Gateway Secure Web Access Overview on page 81
Performing Initial Software Configuration on the J-SRX100 Services Gateway Using
the CLI
This procedure connects the device to the network but does not enable it to forward
traffic. For complete information about enabling the device to forward traffic, including
examples, see the appropriate Junos OS configuration guides.
To configure the software:
1.
Verify that the device is powered on.
2.
Log in as the root user. There is no password.
3.
Start the CLI.
root# cli
root@>
4.
Enter configuration mode.
configure
[edit]
root@#
5.
Set the root authentication password by entering a cleartext password, an encrypted
password, or an SSH public key string (DSA or RSA).
[edit]
root@#
set system root-authentication plain-text-password
New password: password
Retype new password: password
6.
Configure an administrator account on the device.
[edit]
root@#
set system login user admin class super-user authentication
plain-text-password
74
PowerConnect J-SRX100 Services Gateway Hardware Guide