Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 108 / 158

a rescue configuration. For example, if someone inadvertently commits a configuration
that denies management access to a services gateway, you can delete the invalid
configuration and replace it with a rescue configuration by pressing the Reset Config
button.
NOTE: The Reset Config button is recessed to prevent it from being pressed
accidentally.
The rescue configuration is a previously committed, valid configuration. You must have
previously set the rescue configuration through the J-Web interface or the CLI.
To press the Reset Config button, insert a small probe (such as a straightened paper
clip) into the pinhole on the front panel.
• By default, pressing and quickly releasing the Reset Config button loads and commits
the rescue configuration through the J-Web interface or the CLI. The Status LED glows
amber during this time. For details, see the
Junos OS CLI User Guide .
•
By default, pressing and holding the Reset Config button for 15 seconds or more—until
the Status LED glows amber—deletes all configurations on the device, including the
backup configurations and rescue configuration, and loads and commits the factory
configuration. For details about factory default settings, see the
Junos OS Administration
Guide .
Related
Documentation
Changing the Reset Config Button Behavior on the J-SRX100 Services Gateway on
page 94
•
•
Monitoring the J-SRX100 Services Gateway Chassis Using the CLI on page 87
•
Monitoring the J-SRX100 Services Gateway Components Using LEDs on page 89
•
Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions on page 91
•
Monitoring the J-SRX100 Services Gateway Power System on page 92
•
Dell Support on page 95
Changing the Reset Config Button Behavior on the J-SRX100 Services Gateway
You can change the default operation of the Reset Config button by limiting how the
button resets the services gateway:
•
To prevent the Reset Config button from setting the device to the factory default
configuration and deleting all other configurations:
admin@host# set chassis config-button no-clear
You can still press and quickly release the button to reset it to the rescue configuration.
•
To prevent the Reset Config button from setting the device to the rescue configuration:
admin@host# set chassis config-button no-rescue
94
PowerConnect J-SRX100 Services Gateway Hardware Guide