Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 39 / 158

•
If you are mounting the device in a rack with other equipment, or if you are placing it
on the desktop near other equipment, ensure that the exhaust from other equipment
does not blow into the intake vents of the chassis.
Table 14 on page 25 provides information on the clearance requirements for maintaining
the optimum airflow and the distances for facilitating easy maintenance of the device.
Table 14: Clearance Requirements for the J-SRX100 Services Gateway
Requirement for Clearance
Recommended
Clearance
Location
Space for service personnel to
remove and install hardware
components 2.5 in. (6.35 cm) Front of the chassis
Space for service personnel to
remove and install hardware
components 2.5 in. (6.35 cm) Rear of the chassis
Space for cable management and
organization 2.5 in. (6.35 cm) Between front-mounting flange
and rack or cabinet edge
Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis 2.5 in. (6.35 cm) Between side of the chassis and
any non-heat-producing
surface such as a wall or
cabinet side
Space for the cooling system to
function properly and to maintain
unrestricted airflow around the
chassis 0.4 in. (1 cm) Between side of the chassis and
devices that have fans or
blowers
NOTE: The air vents are provided on the sides of the chassis for the J-SRX100
Services Gateway.
Related
Documentation
J-SRX100 Services Gateway Description on page 3
•
•
General Site Guidelines for Installing the J-SRX100 Services Gateway on page 22
•
Site Preparation Checklist for the J-SRX100 Services Gateway on page 19
•
J-SRX100 Services Gateway Cabinet Requirements on page 22
•
J-SRX100 Services Gateway Rack Requirements on page 23
25
Chapter 3: Preparing the Site for J-SRX100 Services Gateway Installation