Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 103 / 158

Item Version Part number Serial number Description
Chassis AU0809AF0003 Dell
J-SRX100S
Routing Engine REV 00 750-02177 BAAA0116
RE-SRX100-HM
da0 999 MB ST72682 Nand Flash
usb0 <addr 1> DWC OTG root hub 0 vendor 0x0000 uhub0
usb0 <addr 2> product 0x005a 90 vendor 0x0409 uhub1
usb0 <addr 3> ST72682 High Speed Mode 64218 STMicroelectronics umass0
FPC 0 FPC
PIC 0 8x FE Base
PIC
Power Supply 0
NOTE: The values given in the usb0 rows provide information for USB level
debugging. This information is about USB hub topology.
Related
Documentation
Monitoring the J-SRX100 Services Gateway Components Using LEDs on page 89
•
•
Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions on page 91
•
Monitoring the J-SRX100 Services Gateway Power System on page 92
•
Maintaining the J-SRX100 Services Gateway Hardware Components on page 85
•
Using the Reset Config Button on the J-SRX100 Services Gateway on page 93
•
Dell Support on page 95
Monitoring the J-SRX100 Services Gateway Components Using LEDs
Table 30 on page 89 describes the status of the LEDs on startup of the device.
Table 30: Services Gateway LED Status on Startup
Description State LED
Indicates that the device is starting up. Amber Status LED
Indicates that the device is starting up
for the first time since no rescue
configuration is set.
NOTE: When the system is up and
running, if the Alarm LED is off, it
indicates that no alarms are present on
the device.
Amber Alarm LED
89
Chapter 15: Monitoring the J-SRX100 Services Gateway