Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 104 / 158

Table 30: Services Gateway LED Status on Startup (continued)
Description State LED
Indicates that the device is receiving
normal power supply. Green Power LED
Indicates that the device is not part of
chassis clustering set up. Off HA LED
The LEDs available on the services gateway display the status of various components.
Table 31 on page 90 describes the LEDs.
Table 31: Component LEDs on the Services Gateway
Possible Causes and
Corrective Actions
Meaning State LED
Normal condition. No action
is required. Indicates that the device is
functioning normally. Green Status LED
Normal condition. No action
is required.
•
Indicates that the device
is starting up.
• Indicates that the Reset
Config button is pressed.
Amber
Contact Dell Support. See
“Dell Support” on page 95. Indicates that an error is
detected in the device. Red
Major alarm indicates a
critical situation on the
services gateway that
requires immediate action.
See “Monitoring the
J-SRX100 Services
Gateway Using Chassis
Alarm Conditions” on
page 91. Indicates a major alarm. Red Alarm LED
Minor alarm condition
requires monitoring or
maintenance. If left
unchecked, it might cause
an interruption in service or
degradation in
performance. See
“Monitoring the J-SRX100
Services Gateway Using
Chassis Alarm Conditions”
on page 91. Indicates a minor alarm. Amber
Normal condition. No action
is required. Indicates that there are
currently no alarms. Off
90
PowerConnect J-SRX100 Services Gateway Hardware Guide