Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 83 / 158

NOTE: Most modems have an RS-232 DB-25 connector. You must
separately purchase an adapter to connect your modem to the RJ-45 to
DB-9 adapter and the Ethernet cable supplied with the services gateway.
Related
Documentation
Connecting the Modem at the J-SRX100 Services Gateway End on page 67
•
•
Connecting to the CLI at the User End for the J-SRX100 Services Gateway on page 69
•
J-SRX100 Services Gateway Software Configuration Overview on page 71
Connecting to the CLI at the User End for the J-SRX100 Services Gateway
To remotely connect to the CLI through a dial-up modem connected to the console port
on the services gateway:
1.
Connect a modem at your remote location to a management device such as a PC or
laptop computer.
2.
Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) on the PC or laptop computer.
3.
Select the COM port to which the modem is connected (for example, COM1 ).
4.
Configure the port settings shown in Table 23 on page 69.
Table 23: Port Settings for Connecting CLI at User End
Value Port Setting
9600 Bits per second
8 Data bits
None Parity
1 Stop bits
None Flow control
5.
In the HyperTerminal window, enter AT .
For more information on the AT commands, see the Junos OS Administration Guide .
An
OK
response verifies that the modem can communicate successfully with the
COM
port on the PC or laptop.
6.
Dial the modem that is connected to the console port on the services gateway by
entering
ATDT remote-modem-number
. For example, if the number of the modem
connected to the console port on the services gateway is
0013033033030
, enter
ATDT
0013033033030 .
69
Chapter 12: Connecting the J-SRX100 Services Gateway to Management Devices