Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 56 / 158

•
Installing the J-SRX100 Services Gateway on a Desk on page 46
• Installing the J-SRX100 Services Gateway on a Wall on page 47
Installing the J-SRX100 Services Gateway in a Rack
You can front-mount two J-SRX100 Services Gateways in a rack. Many types of racks
are acceptable, including four-post (telco) racks, enclosed cabinets, and open-frame
racks. For more information about the type of rack or cabinet the J-SRX100 Services
Gateway can be installed into, see “J-SRX100 Services Gateway Rack Requirements” on
page 23.
NOTE: If you are installing multiple devices in one rack, install the lowest one
first and proceed upward in the rack.
To install the device in a rack:
1.
Position the two devices in the rack-mount tray as shown in Figure 6 on page 42.
Figure 6: Installing the J-SRX100 Services Gateway in a Rack
J-SRX100
J-SRX100
2.
Use a number-1 Phillips screwdriver to install the screws that secure the device to the
rack-mount tray.
3.
Have one person grasp the sides of the rack-mount tray, lift it, and position it in the
rack.
4.
Align the bottom hole in each side of the rack-mount tray with a hole in each rack rail
as shown in Figure 7 on page 43, making sure the rack-mount tray is level.
42
PowerConnect J-SRX100 Services Gateway Hardware Guide