Dell PowerConnect J-SRX100, Руководство по оборудованию, Страница: 61 / 158

The vertical position requires the vertical installation kit, which consists of a vertical
installation stand.
To install the device in a vertical position:
1.
Place the device on a flat and level surface with the logo facing up, as shown in Figure
12 on page 47.
Figure 12: Installing the J-SRX100 Services Gateway on a Desk
J-SRX100
J-SRX100
2.
Attach the vertical stand to the right side of the chassis as shown in Figure 12 on
page 47.
3.
Place the chassis vertically on the desk with the stand resting on the desk.
Related
Documentation
Required Tools and Parts for Installing and Maintaining the J-SRX100 Services Gateway
on page 31
•
•
Preparing the J-SRX100 Services Gateway for Desk-Mount Installation on page 38
•
J-SRX100 Services Gateway Safety Requirements, Warnings, and Guidelines on page 41
•
Installing the J-SRX100 Services Gateway in a Rack on page 42
•
Installing the J-SRX100 Services Gateway on a Wall on page 47
Installing the J-SRX100 Services Gateway on a Wall
You can install the J-SRX100 Services Gateway on a wall. The device is shipped with the
rubber feet attached. The rubber feet help stabilize the device on the wall and enhance
airflow.
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
To install the device on a wall:
47
Chapter 8: Installing the J-SRX100 Services Gateway