Dell OptiPlex GX150 Скачать руководство пользователя | Manualshive

Страница: 63 / 154

background image

Back to Contents Page

Help Overview: Dell™ OptiPlex™ GX150 System User's Guide

Technical Assistance

If you need assistance with a technical problem, perform the following steps:

1. Run the Dell Diagnostics.

2. Make a copy of the

Diagnostics Checklist

and fill it out.

3. Use Dell's extensive suite of online services available at the Dell website (

www.dell.com

) for help with installation and troubleshooting

procedures.

4. If the preceding steps have not resolved the problem, call Dell for technical assistance.

When prompted by Dell's automated telephone system, enter your Express Service Code to route the call directly to the proper support
personnel. If you do not have an Express Service Code, open the

Dell Accessories

folder, double-click the

Express Service Code

icon, and follow the directions.

For instructions on using the technical support service, see "

Technical Support Service

" and "

Before You Call

."

Help Tools

Dell provides a number of tools to assist you. These tools are described in the following sections.

World Wide Web

The Internet is your most powerful tool for obtaining information about your computer and other Dell products. Through the Internet, you can access
most of the services described in this section, including AutoTech, TechFax, order status, technical support, and product information.

You can access Dell | Support at

support.dell.com

. Select your region on the

WELCOME TO DELL SUPPORT

page, and fill in the requested

details to access help tools and information.

You can contact Dell electronically by using the following addresses:

l

World Wide Web

www.dell.com/

www.dell.com/ap/

(for Asian/Pacific countries only)

www.euro.dell.com

(for Europe only)

www.dell.com/la/

(for Latin American countries)

l

Anonymous file transfer protocol (FTP)

ftp.dell.com/

Log in as user:

anonymous

, and use your e-mail address as your password.

l

Electronic Support Service

[email protected]

Technical Assistance

Product Information

Help Tools

Returning Items for Warranty Repair or Credit

Problems With Your Order

Before You Call

NOTE: Dell's Express Service Code system may not be available in all countries.

NOTE: Some of the following tools are not always available in all locations outside the continental U.S. Please call your local Dell
representative for information on availability.

«
...
61
62
63
64
65
...
»

Содержание OptiPlex GX150



























































































































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex GX150

Бренд: Arbor Technology Страницы: 115

UTC-520FP-IKA0E Series

Бренд: Advantech Страницы: 2

Бренд: Vivo Страницы: 2

Nuvo-6000 Series

Бренд: Neousys Technology Страницы: 100

Rexroth 3 842 998 350

Бренд: Bosch Страницы: 122

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 39

Бренд: Samsung Страницы: 48

Бренд: Samsung Страницы: 21

Бренд: Samsung Страницы: 27

Бренд: Samsung Страницы: 31

Бренд: Samsung Страницы: 78

Бренд: Samsung Страницы: 96

Бренд: Samsung Страницы: 106

Бренд: Samsung Страницы: 116

Бренд: Samsung Страницы: 134

Personal Computer

Бренд: Samsung Страницы: 143

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды