Dell OptiPlex GX150 Скачать руководство пользователя страница 120

Страница: 120 / 154

3. Insert the AGP card into the

connector

on the system board. Make sure that the card is securely fastened by the AGP card clip.

Inserting an AGP Card

a. Depending on your computer, press the AGP card clip lever toward the expansion-card cage or toward the PCI 1 slot.

b. Slide the AGP card into place.

c. Release the AGP card clip lever, ensuring that the tab on the AGP card clip lever fits into the notch on the front end of the AGP

card.

4. Secure the AGP card bracket by lowering the securing lever on the back panel.

Close the computer cover

, reconnect your computer and peripherals to their electrical outlets, and turn them on.

6. Reset the chassis intrusion detector by entering system setup and changing the

Chassis Intrusion

option to

Enabled

Enabled-Silent

To install a GPA (formerly called AIMM) card, perform the following steps.

Open the computer cover

2. Locate the GPA

connector

on the system board.

3. Insert the card into the connector.

a. Hook the back end of the card under the AGP card clip tab.

b. Lower the front end of the card, and push the AGP card clip lever away so that the AGP card clip lever tab is out of the way.

c. Insert the card firmly into the connector, and release the lever so that the tab is over the front end card bottom.

Hinged lever

Front end notch of AGP card

I/O panel AGP video connector

AGP card clip lever

NOTE:

After you open and close the cover, the chassis intrusion detector causes the following message to appear on the screen at the

next system start-up:

ALERT! Cover was previously removed.

NOTE:

If a setup password has been assigned by someone else, contact your network administrator for information on resetting the

chassis intrusion detector.

Содержание OptiPlex GX150



























































































































































Результаты поиска

Содержание OptiPlex GX150

Отзывы:

Похожие инструкции для OptiPlex GX150

Бренды по названию

Популярные бренды

Dell OptiPlex GX150, Руководство пользователя

Результаты поиска

Содержание OptiPlex GX150

Отзывы:

Похожие инструкции для OptiPlex GX150

Бренды по названию

Популярные бренды