Dell OptiPlex GX150 Скачать руководство пользователя страница 55

Страница: 55 / 154

4. Reinstall the 5.25-inch floppy drive and bracket assembly in the chassis by gently sliding the bracket into place until the tabs securely click

into position.

5. If you are installing a drive that has its own controller card,

install the controller card in an expansion slot

6. Connect a power cable to the power input connector on the back of the drive.

7. Connect the appropriate interface cable to the interface connector on the back of the drive.

If your system came with an EIDE CD-ROM or tape drive, use the spare connector on the existing interface cable. Otherwise, use the
EIDE interface cable provided in the drive kit.

Attaching Cables to the 5.25-Inch Drive in the Small Form-Factor Desktop System

8. Connect the interface cable to the system board or a controller card, depending on the type of drive.

For an EIDE tape drive or CD-ROM drive, connect the other end of the interface cable to the interface connector labeled "IDE2"
on the

system board

For a floppy drive or non-EIDE tape drive, connect the cable from the drive to the interface connector labeled "DSKT" on the

system board

For a drive that comes with its own controller card, connect the other end of the interface cable to the controller card.

9. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

10. If the 5.25-inch drive bay was previously empty, remove the front-panel insert from the front panel.

a. Remove the

5.25-inch front panel

with your fingers or a plastic screwdriver.

b. Remove the insert.

c. Replace the front panel piece by snapping it into place.

11. Close the computer cover, reconnect your computer and peripherals to their electrical outlets, and turn them on.

12. Update your system configuration information.

If you installed a floppy drive, enter

system setup

and update the appropriate

Diskette Drive A

Diskette Drive B

option to

reflect the size and capacity of your new floppy drive.

If you installed a non-EIDE tape drive as the second drive, set the

Diskette Drive B

option to

Not Installed

DC power cable

Power input connector

Audio cable

Audio connector

Floppy/tape drive interface connector

Interface cable

System board interface connector (IDE2)

Содержание OptiPlex GX150



























































































































































Результаты поиска

Содержание OptiPlex GX150

Отзывы:

Похожие инструкции для OptiPlex GX150

Бренды по названию

Популярные бренды

Dell OptiPlex GX150, Руководство пользователя

Результаты поиска

Содержание OptiPlex GX150

Отзывы:

Похожие инструкции для OptiPlex GX150

Бренды по названию

Популярные бренды