Optional internal USB memory key
Replacing optional internal USB memory key
Prerequisites
CAUTION:
To avoid interference with other components in the server, the maximum permissible dimensions of the USB
memory key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1. Follow the safety guidelines listed in
on page 45.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Locate the USB port or USB memory key on the system board.
2. If installed, remove the USB memory key from the USB port.
3. Insert the replacement USB memory key into the USB port.
Next steps
1. Follow the procedure listed in
After working inside your system
2. While booting, press F2 to enter
and verify that the system detects the USB memory key.
Optional MicroSD or vFlash card
Removing the internal micro SD card
Prerequisites
1. Follow the safety guidelines listed in
on page 45.
2. Follow the procedure listed in
Before working inside your system
Steps
Locate the micro SD card slot on the internal dual SD module (IDSDM), and press the card to release it from the slot.
NOTE:
Temporarily label each micro SD card with its corresponding slot number before removal. Reinstall the micro SD
cards into the corresponding slots.
Installing and removing system components
87
