a. Push the battery holder slightly away.
NOTE:
Ensure that you do not push the battery holder more that 3.2 millimeters or you might risk damaging the
part.
b. Push the battery toward the positive side of the battery till the battery disengages from the connector.
c. Lift the battery away from the system.
Figure 50. Removing the system battery
3. To install a new system battery:
a. Push the battery holder slightly away.
NOTE:
Ensure that you do not push the battery holder more that 3.2 millimeters or you might risk damaging the
part.
b. Hold the battery with the "+" sign facing the positive side of the battery connector.
c. Insert the battery down into the connector and push the positive side of the battery until the battery snaps into place.
Figure 51. Installing the system battery
Next steps
1. Install the following:
a.
b.
c.
2. Follow the procedure listed in
After working inside your system
3. Enter the System Setup to confirm that the battery is operating properly.
4. Enter the correct time and date in the System Setup's
Time
and
Date
fields.
5. Exit the System Setup.
6. To test the newly installed battery, remove the system from the enclosure, for at least an hour.
7. Reinstall the system into the enclosure, after an hour.
8. Enter the System Setup and if the time and date are still incorrect, see the
section.
86
Installing and removing system components
