Figure 39. Installing the Network Daughter Card
Next steps
1.
Install the PCIe mezzanine card
2. Follow the procedure listed in
After working inside your system
Mezzanine card
Removing the PCIe mezzanine card
Prerequisites
1. Follow the safety guidelines listed in
on page 45.
2. Follow the procedure listed in
Before working inside your system
Steps
1. Push and hold the retention bracket away from the PCIe mezzanine card.
2. Open the PCIe mezzanine card retention latch by pressing the release tab on the retention latch.
3. Lift the end of the retention latch until the two connectors on the PCIe mezzanine card disengage from connectors on the system
board.
CAUTION:
To prevent damage to the PCIe mezzanine card, you must hold the card only by its edges.
4. Lift the PCIe mezzanine card away from the system.
5. Close the retention latch.
Installing and removing system components
77
