Figure 41. Installing the PCIe mezzanine card
Next steps
Follow the procedure listed in
After working inside your system
Storage controller card
Removing the storage controller card
Prerequisites
1. Follow the safety guidelines listed in
on page 45.
2. Follow the procedure listed in
Before working inside your system
3. Remove the following:
a.
b.
c.
Steps
1. Using the Phillips #2 screwdriver, loosen the retention screws on the drive cable connector and lift it away from the storage controller
card.
CAUTION:
To prevent damage to the storage controller card, you must hold the card only by its edges.
2. Lift the storage controller card away from the system.
Installing and removing system components
79
