![Dell 7CX5T Скачать руководство пользователя страница 51](http://html.mh-extra.com/html/dell/7cx5t/7cx5t_installation-and-service-manual_85052051.webp)
Viewing Network Settings
To view the
Network Settings
screen, perform the following steps:
Steps
1. Power on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the
System Setup Main Menu
screen, click
System BIOS
.
4. On the
System BIOS
screen, click
Network Settings
.
Network Settings screen details
The
Network Settings
screen details are explained as follows:
About this task
Option
Description
UEFI PXE Settings
Options
Description
PXE Device n (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI PXE boot option is created for the
device.
PXE Device n
Settings(n = 1 to
4)
Enables you to control the configuration of the PXE device.
UEFI HTTP
Settings
Options
Description
HTTP Device (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the
device.
HTTP Device n
Settings (n = 1 to
4)
Enables you to control the configuration of the HTTP device.
UEFI iSCSI
Settings
Enables you to control the configuration of the iSCSI device.
Table 29. UEFI iSCSI Settings screen details
Option
Description
iSCSI Initiator Name
Specifies the name of the iSCSI initiator in IQN
format.
iSCSI Device1
Enables or disables the iSCSI device. When disabled,
a UEFI boot option is created for the iSCSI device
automatically. This is set to
Disabled
by default.
iSCSI Device1 Settings
Enables you to control the configuration of the iSCSI
device.
TLS
Authentication
Configuration
View and/or modify this device's boot TLS authentication mode.
None
means the HTTP server and the client will
not authenticate each other for this boot.
One way
means the HTTP server will be authenticated by the client,
while the client will not be authenticated by the server. This option is set to
None
by default.
Pre-operating system management applications
51
Содержание 7CX5T
Страница 21: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 21 ...
Страница 22: ...Figure 17 Electrical overview 22 Dell EMC PowerEdge T640 overview ...
Страница 23: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 23 ...
Страница 24: ...Figure 19 System tasks 24 Dell EMC PowerEdge T640 overview ...