Dell 7CX5T, Инструкция по установке и обслуживанию

Страница: 14 / 165

Table 3. iDRAC Quick Sync 2 indicators and descriptions
iDRAC Quick Sync 2 indicator
code
Condition Corrective action
Off (default state) Indicates that the iDRAC Quick Sync 2
feature is turned off. Press the iDRAC
Quick Sync 2 button to turn on the iDRAC
Quick Sync 2 feature.
If the LED fails to turn on, reseat the cable and check.
If the problem persists, see the
Getting help section.
Solid white Indicates that iDRAC Quick Sync 2 is ready
to communicate. Press the iDRAC Quick
Sync 2 button to turn off. If the LED fails to turn off, restart the system. If the
problem persists, see the
Getting help section.
Blinks white rapidly Indicates data transfer activity.
If the indicator continues to blink indefinitely, see the
Getting help section.
Blinks white slowly Indicates that firmware update is in
progress.
If the indicator continues to blink indefinitely, see the
Getting help section.
Blinks white five times rapidly and
then turns off Indicates that the iDRAC Quick Sync 2
feature is disabled. Check if iDRAC Quick Sync 2 feature is configured to
be disabled by iDRAC. If the problem persists, see the
Getting help section. For more information, see
www.dell.com/idracmanuals www.dell.com/
operatingsystemmanuals .
Solid amber Indicates that the system is in fail-safe
mode. Restart the system. If the problem persists, see the
Getting help section.
Blinking amber Indicates that the iDRAC Quick Sync 2
hardware is not responding properly. Restart the system. If the problem persists, see the
Getting help section.
System health and system ID indicator codes
The system health and system ID indicator is located on the front panel of your system.
Figure 7. System health and system ID indicators
Table 4. System health and system ID indicator codes
System health and system ID indicator code Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Blinking amber Indicates that the system is experiencing a fault. Check the System
Event Log for specific error messages. For information about the
event and error messages generated by the system firmware and
agents that monitor system components, go to
qrl.dell.com > Look
Up > Error Code , type the error code, and then click Look it up ..
14 Dell EMC PowerEdge T640 overview