degdrive DGI900, Руководство пользователя

Страница: 250 / 251

250
4: 4800BPS;
5: 9600BPS;
6: 19200BPS;
7: 38400BPS;
8: 57600BPS;
9: 115200BPS.
This parameter is used to set the data transmission rate between host computer and
inverter. Note that the host computer and the inverter set the baud rate must be the
same,Otherwise, communication will not work.
PC.01 Data Format Range: 0
～
3 0
0
：
No parity: data format
＜
8,N,2>;
1
：
Even check = data format
＜
8,E,1>;
2
：
Odd parity = data format
〈
8
，
0,1>;
3
：
No parity, data format<8-N-l>.
This parameter must be consistent with the host computer, or can not communicate.
PC.02 Local address Range: 1
～
247 1
When the local address is set to 0, that is broadcast address, to achieve PC broadcast
function.
The uniqueness of the local address (in addition to broadcast address sunset, which is to
achieve PC and inverter peer-to-peer communications.
PC.03 Response delay Range: 0~20ms 2ms
Response delay: refers to the inverter data reception to the host computer to send data to
the middle of the interval. If the response delay is less than the system processing time, the
response delay is based on the system processing time. If the response delay is longer than