Defibtech RMU-1000, Руководство пользователя

Страница: 27 / 65

3.11 Disassembling and Storing the RMU-1000 ACC
The RMU-1000 ACC should be stored in the Carrying Case. Use the following steps to
disassemble and store the unit in the case:
• Remove the Compression Module from the Frame by pushing down and rotating the
Compression Module approximately 90 degrees in either direction. Lift the Compression
Module from Frame and place in the appropriate storage section of the case. Always leave
a fully charged Battery Pack inserted in the Compression Module when storing.
• Release the Frame from the Backboard by pressing the Backboard release levers and lifting
the Frame from the Backboard. Note that the Frame can be released one side at a time.
• Place the components, User Manual, and Quick Reference Guide in the Carrying Case.
• Place at least one Patient Interface Pad in the Carrying Case.
Store the RMU-1000 ACC in environmental conditions within range of the specifi cations (see
“Environmental” section in Chapter 7 of this manual).
3.
S
et
ting Up the
RMU-1
0
0
0 A
CC
RAC-E1510EN-DN
27