Defibtech RMU-1000, Руководство пользователя

Страница: 39 / 65

4.6 Transport
Note: Prior to transporting a patient with an affixed RMU-1000 ACC, make sure that the
Stabilization Strap has been attached to the unit and that a stretcher or other transportation
equipment is nearby.
To move the patient to a stretcher or another piece of transportation equipment:
• Prepare the stretcher/transport equipment near the patient.
• Position two people on either side of the patient. Other personnel may be needed to
stabilize the patient’s head and limbs, as necessary.
• When ready to move the patient, push Pause to temporarily stop compressions.
• Lift the patient by grabbing the Handle with one hand and use the other hand to support
the lower torso by grasping the patient’s leg, belt or pants.
• After the patient is safely on the stretcher/transport equipment, check that the RMU-1000
ACC and the Piston have not changed their position or readjust them to the target area, if
necessary.
• Push Pause again or the appropriate Run Compressions button to resume compressions.
During transport, the RMU-1000 ACC can be active if the RMU-1000 ACC and patient are safely
and securely positioned on the stretcher/transport equipment and the RMU-1000 ACC remains in
the target area and angle on the patient’s chest.
WARNING
Carefully monitor the position of the piston on the patient’s chest to ensure
that it has not moved from the appropriate target area. Pause compressions
and readjust position if needed.
4.
Using the
RMU-1
0
0
0 A
CC
RAC-E1510EN-DN
39