Defibtech RMU-1000, Руководство пользователя

Страница: 38 / 65

To secure the Patient Wrist Straps to the patient’s wrists:
• Secure the Forearm Strap of the Patient Wrist Strap by placing the patient’s wrist on top of
the Forearm Strap and placing the soft Velcro part of the strap across the patient’s wrist,
as shown in the above left illustration.
• Secure the patient’s wrist to the ACC’s Frame by wrapping the hooked Velcro onto the soft
Velcro section, as shown in the above right illustration. Make sure that the strap securely
holds the patient’s arm in place.
WARNING
Do not over-tighten the Patient Wrist Straps to prevent potential injury.
• Repeat the above two steps to secure patient’s other arm to the ACC’s Frame.
WARNING
Observe the patient’s arms during use. Do not leave a patient
unattended when using the ACC or its accessories (e.g. Patient Wrist
Straps).
WARNING
Make sure that intravenous (IV) access is not obstructed in any way
due to use of the Patient Wrist Straps.
WARNING
Do not use the Patient Wrist Straps to lift the patient. The straps are
only intended to attach the patient’s arms to the ACC during transport.
CAUTION
If the ACC becomes hot, prolonged contact with the patient’s skin
could result in skin burns. If necessary, remove the patient’s arms from
the Patient Wrist Straps.
Securing the Patient Wrist Straps to the Patient (continued)
RAC-E1510EN-DN
38