Defibtech RMU-1000, Руководство пользователя

Страница: 41 / 65

CAUTION
The Battery Pack must always be installed to operate the ACC from external
power.
CAUTION
Only use Defibtech accessories to power the ACC from an external power
source.
CAUTION
The ACC must be paused in order to replace a Battery Pack. Failure to do so
will require the user to power up the ACC and reset the start position in order
to resume compressions.
CAUTION
If there is a malfunction during emergency use and the RMU-1000 ACC cannot
be paused or powered off, remove the Battery Pack from the Compression
Module. When the ACC has stopped, remove the Frame from the patient (as
the Piston does not automatically retract when the Battery Pack is removed).
Start manual compressions as soon as possible.
CAUTION
If a spare Battery Pack or external power source are not available and the
ACC stops compressions, remove the unit from the patient and begin manual
compressions immediately.
4.8 Other Therapies
The ACC may be used in conjunction with other therapies such as defibrillation and other patient
procedures, as appropriate.
CAUTION
Make sure other equipment and/or drugs are applicable for use with the ACC.
Consult the equipment’s operating instructions.
CAUTION
Defibrillation electrodes and pads should not be in contact with and be clear
of the Piston and other ACC components.
WARNING
If the position of the Piston changes as a result of defibrillation or other
therapies, immediately stop compressions and re-adjust the position of the
ACC.
WARNING
Chest compressions may interfere with shock delivery and ECG analysis.
Always pause compressions when providing a shock and during ECG analysis
with other equipment.
Power (continued)
4.
Using the
RMU-1
0
0
0 A
CC
RAC-E1510EN-DN
41