Defibtech RMU-1000, Руководство пользователя

Страница: 24 / 65

To remove the Battery Pack, squeeze the Battery Pack eject release latches on either side of the
Battery Pack opening. After the Battery Pack is partially ejected, pull the Battery Pack out.
CAUTION
The Battery Pack must always be installed in the unit in order to operate the
RMU-1000, even when powered by the AC adapter.
3.9 Charging the Battery Pack
The ACC battery is a proprietary rechargeable Battery Pack. Make sure to fully charge a Battery
Pack as part of preparing the ACC for service. To charge the Battery Pack, install it into the
Compression Module and connect the AC Adapter to the external power input jack on the
Compression Module. The Battery Pack can also be charged using an optional Battery Pack
Charging Station (see Section 6.7 for details).
To connect the AC Adapter to the ACC, insert the AC adapter plug into the Compression Module's
external power input jack as shown in the center illustration above. As the jack is keyed, the raised
notch on the plug must align with the notch on the jack in order for the plug to seat properly and
lock into place. To remove the plug, grasp the top-most portion of the plug barrel and pull, as
shown in the right-most illustration above.
A fully charged Battery Pack condition is indicated by all-green LEDs on the User Control Panel's
Battery Pack status indicator. (To determine Battery Pack status, see the "Battery Pack Indications
and Alerts" charts that follow.)
Note:
The Battery Pack may become unresponsive and non-functional if improperly maintained and
left fully depleted. See Section 5.1, “Routine Unit Maintenance” , for ACC maintenance information.
Installing and Removing the Battery Pack (continued)
RAC-E1510EN-DN
24