DCT Antares SB, Руководство пользователя

Страница: 77 / 238

4.3. *DESTINATIONS (DPS AND DAS)
an IP address or a server name
6
and a TCP or UDP port number.
The Antares SB
TM
is a TCP and/or UDP
7
client which always starts
the communication. This means that the IP host has to be a TCP
or UDP server listening for incoming connections on the same port
specified here.
• The next 5 (DPs 10 to 14) make reference to phone numbers. These
numbers are used to send SMSs or make voice calls. They are also used
as authorization numbers for responding to received SMSs commands
and/or answering incoming voice calls. Defining if a report should be
sent on TAIP or using a custom user message is also done here.
•
The last DP (15) makes reference to the serial port.
For more information see the
XADP
message.
4.3.2 Destination Addresses (DAs)
A Destination Address is a user-defined group of Destination Points . This
enables some reporting commands to route their report to several destina-
tions at the same time with a single definition. Up to 10 (0 to 9) DAs may
be defined. Refer to the
DA
message for more information. This command
enables the user to group a list of DPs and/or a range of DPs.
The main use for DAs is on the routing options of an event definition. The
Event Machine section gives more information about this. What should
be clear on this, is that a report generated by an event is always sent to a
DA, not to a single DP . For this reason DAs make part of the minimum
configuration required by the unit. Some examples of DAs’ definitions are:
1. Defining DA 5 as the group containing DPs 04, 06, 10 and 15:
>
SDA5;P04,P06,P10,P15
<
This will make any event using DA 5 as Destination Address on its
routing options to send the same report to the IP host 04, IP host 06,
phone number 10 and the unit’s serial port. Such an event could be
defined as:
>
SED23NV5;TD1+
<
2. Defining DA 8 as the group containing DPs 00 to 03, 07 to 09 and
14:
>
SDA8;P00:P03,P07:P09,P14
<
3. To delete a DA definition:
>
SDA8U
<
6
Make sure of using the eXtended version of the DP message when working with
names.
7
The unit can be set to listen for UDP queries on an UDP-server manner. See
the
XAUP
and
XAUN
messages.
75