DCT Antares SB, Руководство пользователя

Страница: 187 / 238

6.30. (XACR) COUNTER REPORT
6.30 (XACR) Counter Report
Qualifiers :
S
,
R
Use this message to have the unit generate a
TX
message to a Destination
Point (DP) or Destination Address (DA) containing an specific counter’s
(see
GC
message) value. The message takes a counter’s index, and a DP or
DA index. The message has the following format:
AABB
Chars Item Format Value Meaning
2 Counter
Index AA 00-19 Counter’s index whose value is going
to be reported on a
TX
message.
2 Destination BB Destination for the
TX
message:
If the first character of the field is the
letter
A
it is understood by the unit
that the second digit holds a Destina-
tion Address . If both characters of the
field are digits, the unit assumes the
user is specifying a
Destination Point .
Destination Addresses range from 0 to
9.
Destination Points range from 00 to
15.
6.30.1 Reported Message
After receiving the
XACR
command the unit will send a
TX
message to the
selected DP/DA with the selected counters value.
The message for a counter configured to count distance is as follows:
>
RTXDistancer 2 = 10 x(1000m)
<
This is going to be displayed on the AVL software as:
Distancer 2 = 10 x(1000m)
The first word holds the type of counter, then the counters index is shown.
After the equal value the counters value followed by the delta factor config-
ured for the counter.
Other types of counter messages are:
Timer 5 = 2 x(300s)
Distancer 2 = 70 x(1000m)
Counter 3 = 1200 x (10)
If the counter’s index is followed by
(S)
it means the counter is actually
suspended.
185