DCT Antares SB Скачать руководство пользователя страница 57

Страница: 57 / 238

3.9. TAIP CONSOLE

Qualifier

Action

Query for a single sentence.

Response to a query or a scheduled
report.

Configuration or

set

message.

Message Identifier

Alphabetical characters used to identify messages. For example

for a position-velocity message,

for an event definition or

for

an error message.

See the

TAIP reference

chapter for a full list.

There are some messages which are an extension to the normal TAIP
reference for which the

Message Identifier

, these messages have

a secondary identifier which is formed by the two characters following
the

identifier. Extended messages are also described on the

TAIP

reference

chapter.

Data String

The format of a data string depends on the message qualifier and the
message identifier. The formats for each messages are described on
the

TAIP reference

chapter.

Vehicle ID

The unit can be configured to output every message with the vehicle’s
ID. This is optional and is controlled by the

message. The default

ID is set to

0000

. The

Antares SB

will check all incoming messages

for ID, if no ID is specified, the unit will accept the message. If the ID
is included in messages but does not compare with the ID previously
set, the message will be ignored.

Antares SB

can be configured to use its unique IMEI number as

reporting ID. See the configuration chapter for more information.

Message Delimiter

The

character signifies end of a sentence and is used as the message

delimiter.

3.9.2

Reporting messages

The unit output messages when a command or query is sent or when
reporting an event message generated by the

Event Machine

. These

messages are either the

messages. See the TAIP reference for

information on how to get the information contained on these reports.

Содержание Antares SB















































































































































































































































Результаты поиска

Содержание Antares SB

Отзывы:

Похожие инструкции для Antares SB

Бренды по названию

Популярные бренды

DCT Antares SB, Руководство пользователя

Результаты поиска

Содержание Antares SB

Отзывы:

Похожие инструкции для Antares SB

Бренды по названию

Популярные бренды