DCT Antares SB, Руководство пользователя

Страница: 61 / 238

3.11. REPORTS’ MESSAGES
An AVL server may have SMS communication capacity by using a
SMPP
10
system or a GSM modem connected trhu a USB or serial
port.
For information on how to configure a Telephone Number Destina-
tion to send either TAIP messages or user messages refer to the
XADP
message and the
XATM
message on the TAIP reference.
3.11 Reports’ messages
Antares SB
TM
reporting criteria is based on an Event Machine . The
Event Machine allows the user the creation of up to 50 events. These
events can be triggered by several situations
11
. The Event Machine
allows the unit to send
12
event reporting messages when an event
occurs, and since Firmware Version 5.21 it allows the unit to report
the response of any TAIP command that the user locates on the user-
action section of an event definition. So, the AVL server shall expect
two types of reports from the
Antares SB
TM
: The Events’ Reporting
Messages and the Responses to TAIP commands messages .
3.11.1 Events’ Reporting Messages
When a non-silent event is triggered, a reporting message is generated.
The reporting message contains among the GPS state of the vehicle,
the event code which triggered. There are two types of
Reporting
Messages , the
ET
and
EV
TAIP messages:
•
The
ET
message gives information on the event code, time, date
and GPS quality when the event occurred. Here it is an exam-
ple of such a Reporting Message for event 38:
>
RET001447152212;ID=EXAMPLE
<
For detailed information on this message refer to the
ET
message
on the Unit’s TAIP reference chapter.
• The
EV
message gives information on the event code, time, date,
position, velocity, heading, and GPS quality at the moment of
the event occurrence. Here it is an example of such a Reporting
Message for event 00:
>
REV381442578250-0802813901519512;ID=EXAMPLE
<
10
Short Message peer-to-peer Protocol
11
For detailed information on the Event Machine see the Event Machine section
on the Configuration chapter.
12
Reporting messages can be send to TCP and UDP hosts, to mobile numbers
via SMS and to the unit’s serial port.
59