DCT Antares SB, Руководство пользователя

Страница: 156 / 238

6.9. (GC) COUNTERS, TIMERS, DISTANCERS
6.9 (GC) Counters, Timers, Distancers
Qualifiers :
Q
,
S
,
R
This message is used to configure and manipulate internal counters. Each
counter can be configured as a user-controlled counter, a timer, or a dis-
tancer (counter updated by the traveled distance). For more information
refer to the
Operation chapter. The message has the following format:
AAB[C[DDDDD[EEEEE]]]
Chars Item Format Value Meaning
2 Counter
ID AA 00-19 Specifies one of the counters that it is
associated with a counter signal
CAA
. The
counter signal becomes active when the
specified threshold value is reached.
1 Command B See
Counter’s
Com-
mands
table A counter can be configured in one
of three modes using the Counter (C),
Timer (T), or Distancer (D) command.
1 Recycle
Flag C flag Action performed when the counter
threshold is reached:
R: Recycle counter (set to
zero)
C: Continue counter
X: Use existing or default Re-
cycle Flag
5 Value DDDDD seconds Threshold counter increment when used
with the
I
command or set with the
W
command.
5 Value EEEEE seconds Data increment value for Counter modes.
For Timers, the counter value is incre-
mented by 1 for every Delta elapsed sec-
onds. For Distancers, the counter value
is incremented by 1 for every Delta accu-
mulated meters traveled.
154