dataTaker DT80, Руководство пользователя, Страница: 73 / 417

UM-0085-B09 DT80 Range User Manual Page 73
RG

Example 1
In this program, a vector average is calculated, because it is not meaningful to numerically average wind direction
angles. The inputs are wind speed and direction.
BEGIN"Wind-01"
S1=0,50,0,1000"m/s"
'Wind speed calibration 0–50m/s = 0–1000mV
S2=0,6.2832,0,1000"radians"
'Wind direction 0–2Pi radians = 0–1000mV
Y3=0,3.6"km/h"
'Units text for wind speed report
Y4=0,1"Deg"
'Units text for wind direction report
3..6CV(W)=0
RA5S
'Take a reading every 5 seconds
1V("rawspeed",S1,W)
2V("dir",S2,W)
'clamp neg speed values to 0
CALC("speed",W)=(&rawspeed<0)?0:&rawspeed
3CV("sumX",W)=3CV+MAGDIR2X(&speed,&dir)
4CV("sumY",W)=4CV+MAGDIR2Y(&speed,&dir)
5CV("count",W)=5CV+1
'invalidate reported value if any sample is out of range
6CV("invalid",W)=(6CV)OR(&rawspeed<-1)OR(&rawspeed>60)OR(&dir<-1)OR(&dir>7)
RB1M
'Calculate, report and log every minute
'Report average wind speed (999.9 if invalid)
7CV(W)=XY2MAG(&sumX,&sumY)/&count
CALC("Mean Wind Magnitude",Y3,FF1)=&invalid?999.9:7CV
'Report average direction (-1 if no wind, 999 if invalid)
8CV(W)=(7CV>0)?R2D(XY2DIR(&sumX,&sumY)):-1
CALC("Mean Wind Direction",Y4,FF0)=&invalid?999:8CV
3..6CV(W)=0
LOGON
END

Example 2
This program scans ten channels and calculates a cross-channel average.
BEGIN"Wind-02"
RA10S
1CV(W)=0
'Clear 1CV
1..10V(+=1CV,W)
'Sum 10 voltages into 1CV
1CV=1CV/10
'Divide by 10 for average
END