dataTaker DT80 Скачать руководство пользователя страница 172

Страница: 172 / 417

UM-0085-B09

DT80 Range User Manual

Page 172

Sample HTML output generated by the

#channeltable

directive is as follows:

</colgroup>

<thead>

<tr>

<th>Schedule</th>

<th>Value</th>

<th>Units</th>

<th>Timestamp</th>

</tr>

</thead>

<tbody>

<tr>

</tr>

<tr>

<td>Geyser Temp</td>

</tr>

<tr>

<td>Gravy Press</td>

</tr>

</tbody>

</table>

Note

: the

CSS

(Cascading Style Sheet) class ids in the table and colgroup tags have been used to style the table. To change the style

(colours, spacing, etc.), create another CSS file, reusing the same class ids. By default, the table will be displayed without any styles

applied.

#measure Directive

This directive is used to perform a input channel measurement. This is executed in the Immediate schedule and the data

gathered is not logged.

SSI Directive

Description

<!--#measure channel = "

chan-def

" -->

Evaluates the specified

DT80

channel definition, e.g.

2R(4W)

, as an

immediate channel, waits for it to complete, then inserts the measured value

e.g.:

44.0

#reading Directive

This directive is used to return the most recent reading for the specified channel. The channel is assumed to have been

already defined in a schedule in the current job.

SSI Directive

Description

<!--#reading channel = "

chan-name

" -->

Inserts the most recent reading for the specified existing

DT80

channel, and

the time at which the reading was taken.

e.g.

2009/03/16 20:41:39.298 19.66 degC

Содержание DT80


































































































































































































































































































































































































































Результаты поиска

Содержание DT80

Отзывы:

dataTaker DT80, Руководство пользователя, Страница: 172 / 417

Результаты поиска

Содержание DT80

Отзывы: