LS10 Installation and Operating Guide
Page 80
LS10 Installation & Operating Guide
Document # 9301H66300 Ver. 1.01
Figure 60. LFE Mixed with Left Channel
4.1.5 Subwoofer Audio Processing
Each subwoofer channel from the bass management output can be adjusted with Parametric EQ, Levels,
and Delays.
4.1.6 Low Pass to Other Speaker
Certain speakers have an option to have the low end cross with another speaker, instead of a subwoofer.
This may help to keep the positioning of the speaker’s low end sound, and also to avoid a large number
of speakers being crossed with the subwoofers. This can only be done if the corresponding speaker is
defined as a large speaker.
The following speakers can be crossed to other speakers:
•
Ls/Rs may crossed to L/R
•
Lb/Rb may be crossed to L/R
•
HL/HR may be crossed to L/R
•
HC may be crossed to C
•
T may be crossed to L/R/Ls/Rs.
•
Hls/Hrs may be crossed to Ls/Rs
4.1.7 Phantom Center Option
The Phantom Center option allows you to direct the center channel to the left and right speakers if there
is no Center speaker. There is an offset configuration used to increase or decrease the center channel
level. Note that 0dB offset is the default and includes the 3dB signal level attenuation needed to account
for the sound being sent to 2 speakers.
The phantom center option and offset is set in the Center channel configuration screen.
4.1.8 Phantom Surround Option
The Phantom Surround option allows you to direct the surround channels to the front speakers. This is
used for an installation without surround channel speakers. The left surround channel will be mixed into
the left front channel and the right surround channel will be mixed with the right front channel.
The phantom surround option is set in the left or right surround channel configuration screen.
