LS10 Installation and Operating Guide
Version 1.01
Appendix E. LS10 Remote Command API
E-
16
Document #: 9301H66300 Ver. 1.01
General Commands
1. System Information
Returns system versions and MAC address
Command:
@
SYSTEM
<cr>
Operation
Response:
VER
<space>
version
<LF>
VERDATE
<space>
date
<LF>
MAC
<space>
mac address
<CR>
Read
Parameters
version
Software version number
date
Software date/time
mac address
LS10 MAC address
2. Identify
Get system identify information. Mostly used in discovery protocol.
Command:
@
IDENTIFY
<cr>
Operation
Response:
LS10
<space>
IP
<space>
[screen]
<cr>
Read
Parameters
LS10
General identifier for Datasat audio processor product. XZ
ip
IP address (useful after network broadcast command)
[
Screen
]
User defined ID string, if entered in the LS10 configuration.
3. Model
Determines that the Datasat Audio processor is an LS10.
Command:
@
MODEL
<cr>
Operation
Response:
MODEL
<space>
LS10
<cr>
Read
Parameters
LS10
An LS10 returns this model string.
4. Authorization
Command:
@
AUTH
<space>
[Password]
<cr>
Operation
Response:
AUTH
<space>
[SETUP|OP|SECERR]
<cr>
Read
Give a password to allow usage of restricted commands. The authorization is required for
many commands if access to the LS10 has been configured with a Password. The
AUTH
must be issued before issuing any password protected commands, and is valid only for the
duration of the TCP/IP connection.
Note
: This application accepts only Latin alphanumeric characters.
