Datasat LS10 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 118

background image

LS10 Installation and Operating Guide

Page 2

LS10 Installation & Operating Guide

Document # 9301H66300 Ver. 1.01

Notices

This product contains software proprietary to Datasat Digital Entertainment and protected by US and International
copyright law. Unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited.

WARRANTY/LIMITATION OF LIABILITY

EXCEPT FOR THE LIMITED WARRANTY PROVIDED HEREIN, THIS PRODUCT IS PROVIDED "AS IS"
AND WITHOUT WARRANTY OF ANY KIND.  DATASAT DIGITAL ENTERTAINMENT EXPRESSLY
DISCLAIMS ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  DATASAT DIGITAL ENTERTAINMENT DOES NOT WARRANT THAT THIS PRODUCT WILL
MEET USER’S REQUIREMENTS, OR THAT THE OPERATION OF THIS PRODUCT WILL BE
UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THIS PRODUCT WILL BE CORRECTED.
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL DATASAT DIGITAL
ENTERTAINMENT, OR ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS, BE LIABLE TO USER
FOR ANY INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT OR RELATED DOCUMENTATION.

Copyright

LS10 Audio Processor Installation and Operating Guide, Version 1.01

© 2014, 2015 Datasat Digital Entertainment. All rights reserved.

The content of this publication is subject to change without notice. Datasat Digital Entertainment assumes no
obligation to notify you of any changes or updates. While Datasat Digital Entertainment believes this publication
is accurate, due to ongoing improvements and revisions, Datasat Digital Entertainment cannot guarantee the
accuracy of printed material, nor can it accept responsibility for errors or omissions. Datasat Digital Entertainment
may periodically publish updates and revisions to this publication as it deems necessary.

DTS

®

is a registered trademark of DTS, Inc.

Dolby

®

is a registered trademark of Dolby Laboratories.

Auro-3D

®

is a registered trademark of Auro Technologies

All other trademarks are the properties of their respective owners.

Manufactured under license from Dolby Laboratories. Dolby and the “double-D” symbol are registered trademarks
of Dolby Laboratories.

Manufactured under a license from U.S. Patent No’s: 5,956,674 , 5,974,380 , 5,978,762 ,6,487,535 , 6,226,616 ,
7,212,872 , 7,003,467 , 7,272,567 , 7,668,723 , 7,392,195 ,7,930,184 , 7,333,929 , 7,548,853 , and 7,283,634. DTS,
the Symbol, and DTS and the Symbol together are registered trademarks & DTS Neo:X / 11.1 is a trademark of
DTS, Inc. ©2012 DTS, Inc. All Rights Reserved.

Document No. 9301H66300

May 2015

«
1
2
3
4
...
»

Содержание LS10























































































































Отзывы:

Нет отзывов

Похожие инструкции для LS10

Relion 670 series

Бренд: ABB Страницы: 66

Бренд: GALLERY Страницы: 18

Бренд: UNIA Страницы: 62

Бренд: 3M Страницы: 48

Бренд: 3M Страницы: 19

Speedglas G5-01

Бренд: 3M Страницы: 62

Quickfit Nexus Exit

Бренд: Thomas & Betts Страницы: 2

Бренд: made for movement Страницы: 51

Бренд: p-light Страницы: 28

Бренд: Olsen Страницы: 4

Бренд: Fakir Страницы: 22

Бренд: MacDon Страницы: 2

Бренд: Tascam Страницы: 78

MINISTUDIO CREATOR US-42

Бренд: Tascam Страницы: 11

Бренд: Tar River Страницы: 61

bionic power knee

Бренд: Össur Страницы: 2

BALANCE KNEE OM8

Бренд: Össur Страницы: 36

Бренд: Össur Страницы: 37

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды